ARX 90 TIER 3

  • Photos

  • Videos

  • Virtual Tour

The Ammann ARX 90 T3 Tandem Roller provides features and benefits that ultimately lead to added value for owners of the heavy compactor.

Compaction output is high and the system efficient. Each drum has an independent vibratory pump. The roller also features a heavy-duty, two-stage vibrator and easy adjustment of amplitude and frequency.

A single-drive pump makes for easy service and maintenance as well as reduced costs. The cab’s design provides comfort that helps the operator stay focused and productive throughout the shift.

A differential lock is standard, while the optional ACEforce system provides a host of benefits including measurement and documentation, evaluation of material stiffness, operator guidance and documentation.

  • Highlights

  • Specifications

  • Options

Open All

Overview

  • An independent vibratory pump for each drum
  • Heavy-duty, 2-stage vibrator
  • Simple adjustment of amplitude/frequency
  • Combination version available
  • Chip spreader for project flexibility
  • Single-drive pump
  • Differential lock
  • Articulated steering
  • Articulating oscillation joint
  • Spacious, comfortable and quiet cab
  • Excellent visibility of drum surfaces, edges and spraying bars
  • Rotating and sliding seat
  • Multifunctional display in steering wheel
  • Tiltable and adjustable steering column
  • Control switches on armrest
  • On-board diagnostics
  • Easy access to all service points

arx_90_heavy_tandem_roller_cad_drawing_2880x1620px_bw

Dimensions Metric
A = Machine length 4720 mm
B = Wheelbase 3500 mm
C = Machine height 3000 mm
E = Drum width 1680 mm
F = Machine width 1800 mm
H = Ground clearance 780 mm
I = Drum diameter 1220 mm
J = Drum shell thickness 19 mm
Weights
Operating weight CECE 9470 kg
Operating weight max. 10910 kg
Static linear load 28,1/27,3 kg/cm
VT classification VT 2
Drum
Drum offset max. 170 mm
Engine
Producer DEUTZ
Type TCD 3.6 L4
Emission stage EU Stage IIIa/EPA Tier 3
Output according to ISO 14396 74/100 kW/HP
Drive
No. of speeds 6
Max. working speed 7 km/h
Max. transport speed 10,5 km/h
Theoretical gradeability 25/30 %
Steering
Turning radius inside 5470 mm
Steering and oscillating angle 31/6 ± °
Vibration
Amplitudes 0,34/0,7 mm
Amplitudes ACE 0 – 0,8 mm
Frequencies 42/54 Hz
Frequencies ACE 35 – 55 Hz
Centrifugal forces 68/84 kN
Centrifugal forces ACE 111 kN
Capacities
Fuel 220 l
Sprinkling water tanks capacity 840 l
Emulsion sprinkling (for Kombi version only) 24 l
Standard Equipment
  • CE conformity
  • Diesel engine meets EU Stage IIIa / Tier 3
  • Open platform with ROPS canopy
  • 170° rotating and sliding working station with multifunctional display
  • Two stage vibration system (2 frequencies / 2 amplitudes)
  • Working lights 2 front, 2 rear
  • Smooth drum with vulcolan scrapers
  • Electronic idle control
Optional Equipment
  • Air Condition
  • ACEforce (CCC System)
  • GPS mapping for ACE systems
  • Telematics-ready
  • Pneu-tire axle with emulsion sprinkling and hermal aprons
  • Chip spreader Ammann
  • Edge cutter
  • Oscillation

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close