ARP 95 TIER 4i

  • Photos

  • Videos

  • Virtual Tour

The Ammann ARP 95 T4i Pivot-Steer Roller provides new operator-oriented features that improve productivity. The compactor also utilises pivot steering to provide manoeuvrability and flexibility.

The new cab design helps operators see drum edges and surfaces. In addition, the operator’s seat can be rotated 270 degrees and extended beyond the cab frame to further optimise visibility.

The control display is intuitive and moves with the seat to enable easy viewing. Fingertip steering makes the machine operator friendly and productive. The proprietary Ammann compaction systems ACEforce and ACEpro help provide efficiency and quality.

  • Highlights

  • Specifications

  • Options

Open All

Overview

  • ACEforce and ACEpro compaction control systems
  • Deutz Tier 4i engine
  • 2 vibratory pumps for each drum
  • Simple adjustment of amplitude/frequency
  • Rotating operator’s seat that can be extended beyond the frame
  • Easy-to-view control display
  • Foldable cab and front water tank
  • Finger-tip steering
  • Combination version with a single steel drum and rubber tyres
  • Integrated ROPS
  • Reduced noise levels
  • Easy access to service points and fluid ports

arp_95_heavy_tandem_roller_cad_drawing_2880x1620px_bw

Dimensions Metric US
A = Machine length 4420 mm 174.1 in
B = Wheelbase 3200 mm 126 in
C = Machine height 3000 mm 118.2 in
E = Drum width 1680 mm 66.2 in
F = Machine width 1810 mm 71.3 in
H = Ground clearance 280 mm 11.1 in
I = Drum diameter 1220 mm 48.1 in
J = Drum shell thickness 17 mm 0.7 in
Weight
Operating weight CECE 9610 kg 21 190 Ib
Operating weight max. 11 070 kg  24 410 Ib
Static linear load 28,4/28,8 kg/cm  159/161.3 lb/in
VT classification VT1
Drum
Drum width 1680 mm  66.2 in
Drum offset 1350 mm  53.1 in
Compaction width max. 3030 mm  –
Drum diameter 1220 mm  48.1 in
Drum thickness 17 mm  0.7 in
Engine
Producer DEUTZ
Type TCD 3.6 L4
Emission stage EU Stage IIIb/EPA Tier 4 interim
Output according ISO 3046 74,4 kW 100 HP
Drive
No. of speeds 6
Max. working speed
Max. transport speed 10 km/h 6.21 Mph
Gradeability with/without vibration 25/30 %  25/30 %
Steering
Turning radius inside 2950 mm  115.9 in
Steering and oscillating angle 25/6 ± °  25/6 ± °
Vibration
Amplitudes 0,66/0,26 mm  0.026/0.01 in
Amplitudes ACE 0 – 0,85 mm  0 – 0.033 in
Frequencies 42/55 Hz 2520/ 3300 VPM
Frequencies ACE 37/57 Hz 2220/ 3420 VPM
Centrifugal forces 62/92 kN  62/92 kN
Centrifugal forces ACE -/100 kN  -/100 kN
Capacities
Fuel 165 l 43.6 gal
Sprinkling water tanks capacity 800 l  211.3 gal
Emulsion sprinkling (for Kombi version only) 24 l
STANDARD EQUIPMENT
  • CE conformity
  • Engine EU Stage IIIb / EPA Tier 4 interim
  • Cabine, ventilated and heated
  • Rotating and sliding working station with multifunctional display
  • Two split drums
  • Two stage vibration system (2 frequencies / 2 amplitudes)
  • Working lights 2 front, 2 rear
  • Smooth drum with vulcolan scrapers
  • Inter-axle diff lock
  • Electronic idle control
OPTIONAL EQUIPMENT
  • Air conditioned
  • ACE pro – compaction measurement (absolute) and regulation of vibration parameters
  • ACE force – compaction measurement (absolute)
  • GPS mapping for ACE systems
  • Pneu-tire axle with emulsion sprinkling and thermal aprons
  • Chip spreader Ammann
  • Universal preparation for multiple chip spreaders
  • Edge cutter (one or two)
  • Night illumination kit

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close