APH 1000 TC

  • Photos

The APH 1000 TC is an IR remote-controlled hydrostatic plate that can go where others can’t.

The IR remote abilities ensure operation under the toughest conditions – and in the tightest spaces and deep trenches. The operator is able to steer the vibratory plate from a safe distance with a remote control or cable remote.

The APH 1000 TC achieves high compaction results even in the deepest trenches and most impassable areas thanks to its high performance and to the compact machine design. It is very responsive to the operator’s commands.

Safety is built into the machine, including an emergency stop on the remote control. The vibratory plate automatically shuts off if a connection to the operator is lost or if the machine comes within 2m of the operator.

  • Highlights

  • Specifications

  • Options

Open All

Overview

  • Hydrostatic twin-shaft exciter system
  • Air-cooled Hatz diesel engine with low oil pressure protection system
  • Hydraulic pump for hydrostatic drive and steering; no V belt
  • Robust IR remote control with solar panels for long work intervals
  • Easy access to all service points
  • Optimised base plate for well-balanced operation

aph_1000_tc_vibratory_plate_cad_drawing_2880x1620px_bw

 APH 1000 TC
  Weights & Dimensions  Metric  US
 Machine weight basic unit  715 Kg  1565 lb
 with extension plates 75 mm  747 Kg  1643 lb
 A = Base plate length  520 mm  20,5 in
 B = Machine length  1090 mm  42,9 in
 C = Machine heigth  845 mm  33,3 in
 D = Machine height (w, transport hook)  910 mm  35,8 in
 E = Machine width  696 mm  27,4 in
 F = Base plate width  650 mm  25,6 in
 G = with extensions  800 mm 31,5 in
 Engine
 Engine  Hatz 1D90V  Hatz 1D90V
 Fuel  Diesel  Diesel
 Engine Output  14,8 HP / 10,9  kW 14,8 HP / 10,9  kW
 at RPM  3000  3000
 Fuel consumption  2,5 l/h  0,6 gal/h
 Compaction Forces
 Max, Vibration frequency  46 Hz  2760 vpm
 Max, Centrifugal force  63 kN  15,7 lbf
 Working surface basic unit  1090 m2/h  11733 ft2/h
 with extensions  1350 m2/h  14531 ft2/h
 Max. compaction depth *  90 cm  35 in
 Miscellaneous
 Speed  28 m/min  1 mph
 Tank capacity  10 l  2,2 gal
 Gradeability  35%  0,35
 Max. incline to all sides  25°  25°
 * depending on ground conditions
Standard Equipment
  • Infrared receiver for the remote control with a signal acknowledgement light
  • Cable for remote control as alternative to infrared function
  • Extraordinary large air filter system with active dirt particle separation
  • Aircooled Hatz Diesel engine with oil alert system: powerful and low emissions values
  • Electric starter
Optional Equipment
  • Operation hour meter
  • Extension plates (75 mm)

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close