ARR 1575

  • Photos

  • Videos

  • Virtual Tour

The ARR 1575 is an articulated trench roller that provides perfect ground contact and optimal compaction. The machine and its padfoot drum provide results, even where other compactors have failed. Its ability to work in cohesive soils can prevent the need for soil removal and replacement, providing a significant financial impact. Two steering cylinders help make the ARR 1575 responsive and precise, while the oscillation feature provides excellent stability on uneven surface of a ditch.
  • Highlights

  • Specifications

  • Options

Open All

Productivity

High compaction output

  • Faster compaction of thicker layers in fewer passes

 

Articulated joint with oscillation

  • Higher stability and increased surface coverage and quality
Drum extensions

  • Adapt machine width to jobsite needs

Ergonomics

Simple remote control

  • Intuitive machine control at a safe distance, even with unskilled operator

 

Infra-red remote control

  • Highly safe; operator must  have direct visibility of the machine to operate
Solar power cells on remote control

  • Machine is always ready to work without additional remote control charging

Serviceability

Maintenance-friendly design

  • Easy and fast daily maintenance

 

Accessible service and maintenance points

  • Machine serviced from ground, enabling comfort

 

Maintenance-free parts

  • Reduced risk of machine damage

arr_1575_trench_roller_cad_drawingpx-01

Dimensions Metric US
A = Machine Length 1980 mm 78 in
B = Wheelbase 1000 mm 39.4 in
C= Machine Height 1317 mm 51.9 in
D = Machine Height (hood) 1282 mm 50.5 in
E = Machine Width 601 mm 23.7 in
F = Drum Width 640 / 850 mm 25.2 / 33.46 in
G = Machine Length 2227 mm 87.7 in
I = Drum Diameter 525 mm 20.7 in
Miscellaneous
Fuel tank capacity 28 l 7.4 gal
Hydraulic oil Capacity 16 l 4.2 gal
Weight & Driving characteristic
640 mm 25.2 in
Operating weight 1340 kg 2950 Ib
Oscilation Angle ± 7° ± 7°
Working speed 1.4 km/h 0.9 MPH
Travel speed 2.8 km/h 1.7 MPH
Climbing ability 30 % 30 %
Turning radius Inner 1540 mm 60.6 in
Turning radius outer 2190 mm 86.2 in
850 mm 33.46 in
Operating weight 1450 kg 3200 Ib
Oscilation Angle ± 7° ± 7°
Working speed 1.4 km/h 0.9 MPH
Travel speed 2.8 km/h 1.7 MPH
Climbing ability 30 % 30 %
Turning radius Inner 1440 mm 56.7 in
Turning radius outer 2290 mm 90.2 in
Compaction Forces
Frequency 40 Hz 2400 VPM
Amplitude 1.1 / 0.6 mm 0.043 / 0.024 in
Centrifugal force 75 / 36 kN 75 / 36 kN
Engine
Manufacturer Yanmar 3TNV80F  Yanmar 3TNV80F
Power Acc. ISO 3046-1 14.6 kW 20 HP
ENGINE COMPLIES WITH EMISSION REGULATIONS U.S. EPA Tier 4 Final  U.S. EPA Tier 4 Final
Maximum torque 68.4/1800 Nm(ft Ib)/rpm  68.4/1800 Nm(ft Ib)/rpm
No of Cylinders 3 / water cooling  3 / water cooling
Drive system Hydrostatic  Hydrostatic

STANDARD EQUIPMENT

  • Fully Hydrostatic drive
  • Articulated steering
  • Both drum vibration
  • Central lifting point
  • Infrared and Cable control

OPTIONAL EQUIPMENT

  • Safety bar
  • Set of Drums
  • Drum extensions
  • FilterKit
  • Customer colors
  • Biodegradable Oil
  • ACEecon

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close