AFT 350

  • Photos

  • Videos

  • Virtual Tour

The AFT 350 has surprisingly wide paving capabilities given its compact nature.

These track pavers place asphalt at widths of up to 4.5 m. They are ideally suited to small- and medium-sized jobsites with restricted environments where manoeuvrability is required. This paver is a good fit for jobsites on difficult ground and it ensures thorough leveling.

  • Highlights

  • Specifications

  • Options

Open All

Overview

  • Paving width range of 1830 mm to 4500 mm
  • Machine width enables truck transport without having to dismount when using 2x290mm extension kits
  • Two independently driven, reversible conveyors
  • Electric and gas screed heating systems available
  • Maximum working speed up to 10 m/min
  • Electro-hydraulic auger height adjustment
  • Electro-hydraulic roof lowering system
  • Best operator visibility in this machine class
  • Low discharge height for easy material loading

aft_350_asphalt_paver_cad_drawing_2880x1620px

AFT 350
 Weights & Dimensions Metric
Operation weight 7500/7700 kg
A = Machine length 5030 mm
B = Transport length 4900 mm
C = Axle lenght 2033 mm
D = Machine height 3480 mm
E = Transport height 2800 mm
F = Height without canopy 2500 mm
G = Machine width 3100 mm
H = Transport width 1850 mm
I =  Track gauge 1320 mm
J = Material loading height 580 mm
K = Hopper length 1660 mm
Screed
Screed FSV 350 / FST 350
Standard Paving width 1830–3500 mm
    Max. w/extension 4500 mm
    Min. w/reduction plates 800 mm
Screed type Vibration / Tamper + Vibration
Heating Gas / Electric
Engine & Drivetrain
US Tier 4i
EU Stage IIIB
Manufacturer Deutz
Type TCD 2.9 L4
Engine cooling system Oil / Air cooling
Rated Power 55.4 kW
Undercarriage Tracks
Track contact surface 2033 × 250 mm
Transmission type Hydrostatic
Steering type Electronic
Internal turning radius 1.50 m
Performance
Max. theoretical paving capacity 230 t/h
Mat thickness 5–280 mm
Speed (transfer) 0–4.5 km/h
Speed (paving) 0–35 m/min
Material Feeding
Hopper capacity 8 t
Conveyor belts Two independent, reversible
Augers Two independent, reversible
Auger height adjustment E-Hydraulic
Tank capacities
Fuel 95 l
Hydraulic oil 90 l
Emulsion spray 25 l
STANDARD EQUIPMENT
  • Automatic heating control
  • E-hydraulic adjustable auger height
  • Ammann ISR system (Screed Assist)
  • Hydraulic foldable canopy
OPTIONAL EQUIPMENT
  • Four wheel drive (DT)
  • Longitudinal levelling system
  • Slope control system
  • Reduction plates at 800 mm paving width
  • Mechanical extensions 2×290 mm
  • Mechanical extensions 2×500 mm
  • Proportional ultrasonic augers control
  • Electro-hydraulic crown profile adjustment
  • Heated screed side-end plates
  • Automatic central lubrication system

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close