AFT 270

  • Photos

  • Videos

The track system of the AFT 270 makes it ideally suited for tight jobsites with difficult underfoot conditions.

The paver leaves behind a level mat even in challenging conditions. The tracks are equipped with rubber pads and an automatic tension system with a grease accumulator.

Man-on-Board Version
Man-on-board operations are conducted from an adjustable seat that can slide left or right. The high operator positioning provides an excellent view into the hopper. The dashboard adjusts with the seat position to facilitate ease of operation. On-the-road operators utilise ground controls with anti-vandal guards. The machine is equipped with a hydraulically foldable canopy that covers the operator stand.

Open Platform (F-Version)
The AFT 270 is also available with an open platform (F-Version), which allows the operator to stand. The dashboard and the operator platform are mounted behind the machine, providing the operator with the best view of the screed and hopper.

  • Highlights

  • Specifications

  • Options

Open All

Overview

  • Paving width range of 500 mm to 3330 mm
  • Available with man-on-board and man-standing (F) version
  • Two independently driven, reversible conveyors
  • Electric and gas screed heating systems available
  • Electrohydraulic auger height adjustment
  • Excellent operator visibility
  • Low discharge height for easy loading

aft_270_asphalt_paver_cad_drawing_2880x1620px

Weights & Dimensions
Operation weight 5200 kg (F: 5000 kg)
A = Machine length 4250 mm (F: 4360 mm)
B = Transport length 4100 mm
C = Machine height 3100 mm (F: 2195 mm)
D = Transport height 2800 mm
E = Machine width 3170 mm
F = Transport width 1650 mm
G = Track gauge 1180 mm
H = Material loading height 560 mm
I = Hopper length 1350 mm
Screed
Screed FSV 270
Standard Paving width 1400-2730 mm
Max. w/extension 3330 mm
Min. w/reduction plates 500 mm
Screed type Vibration
Heating Gas / Electric
Engine & Drivetrain
Manufacturer Deutz
Type D2011L03i
Engine cooling system Oil / Air cooling
Rated Power 33,2 kW
Undercarriage Tracks
Track contact surface 1525 x 200 mm
Transmission type Hydrostatic
Steering type Electronic
Internal turning radius 0,7 m
Performance
Max. theoretical paving capacity 150 t/h
Mat thickness 5-250 mm
Speed (transfer) 4,5 km/h
Speed (paving) 27 m/min
Material Feeding
Hopper capacity 6 t
Conveyor belts Two independent, reversible
Augers Two independent, reversible
Auger height adjustment E-Hydraulic
Tank capacities
Fuel 70 l
Hydraulic oil 75 l
Emulsion spray 15 l
STANDARD EQUIPMENT
  • Automatic heating control
  • Electro-hydraulically adjustable augers height
  • The ISR system (Screed Assist)
  • Folding canopy (Standard on Man on board version) for AFT 270
OPTIONAL EQUIPMENT
  • Longitudinal levelling system
  • Slope control system
  • Reduction plates at 500 mm paving width
  • Mechanical extensions to 3330 mm paving width
  • Folding canopy (Optional on F-version)
  • Proportional ultrasonic augers control
  • On-Off ultrasonic augers control
  • Electro-hydraulic crown profile adjustment

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close