AFT 300-2

  • Photos

The Ammann AFT 300-2 Compact Paver is a small machine that is big on power, helping contractors thrive on the most challenging jobsites. A powerful engine delivers the power, while wide tracks provide the necessary grip to help overcome tough grades and challenging underfoot conditions. The tamper-vibration screed provides exceptional pre-compaction, while the material flow system further boosts quality. The compact design enables easy transport between jobsites.


APPLICATIONS

  • Municipal roads
  • Footpaths
  • Cycling tracks
  • Trenches
  • Narrow roads
  • Small parking lots
  • Highlights

  • Specifications

Open All

HIGHLIGHTS

  • Theoretical paving capacity of 300 tonnes per hour
  • Maximum paving width of 3.5 metres
  • Electric- or gas heating for screeds
  • Tamper and vibration screeds available
  • High quality components
  • Excellent visibility from the operator platform
  • Modern design
  • Material hopper with capacity of 5.5 tonnes
  • Low centre of gravity and wide tracks for optimal traction

Material Feeding System

Material conveyor
The fully automated material feeding systems of the AFT 300-2 ensure quality results. A variety of features reduce segregation and enhance productivity.

  • Large feeding capacity of up to 300 tonnes per hour
  • 620 mm material tunnel
  • A divided conveyor with single-drive system to guide flow during asymmetrical paving by covering one side
  • Material flow is controlled by mechanical sensors
Auger system
Productive pavers need powerful augers that optimise flow. The AFT 300-2 utilises a strong auger system that includes a large diameter auger and central drive to bring stability and facilitate the material flow.

  • Large auger diameter of 320 mm
  • Left and right sides separately controlled and reversible
  • Ultrasonic sensor control for precise material monitoring
  • Auger height adjustable by 150 mm (mechanical)
  • Quick refill function of the auger compartment via a single control on the dashboard
Material hopper
Despite the compact dimensions, the Compact Paver class from Ammann features a large 5.5 tonne hopper that provides capacity with great flexibility. With easily adjustable settings on the hopper wings the machine can always be used to its maximum capacity. The individual settings of the left and right hopper wings allow to work close to walls and in tight spaces.

  • 5.5 tonne hopper capacity
  • Independent, hydraulically controlled hopper wings
  • Independently adjustable hopper wings (mechanical)
  • Hydraulic front hopper flap optional available
Pivotable push rollers
Shock absorbing push rollers reduce the impact from loading trucks that dock to the paver. The pivotable system is flexible so it can match varied lorry sizes.

  • Pivotable for use on curvy roads
  • 100 mm extendible (mechanical) to adjust to truck size
  • Push rollers raise and lower together with hoppers

Operator Platform

Operator station
The operator panel features intuitive controls, but that’s only the beginning. Toggle switches are positioned according to both function and frequency of use. That means frequently used functions – such as the hopper, screed and drive levers – are close to
the operator.

  • Intuitive controls
  • Each toggle switch positioned according to function group and frequency of use
  • Backrest that includes a storage compartment
  • Non-slip platform profile
  • Sliding step extensions for increased visibility
One-Man Paving
If needed, the machine can be operated by a single operator – and he doesn’t even have to be on the machine thanks to a technologically advanced remote control system.

  • Optional remote steering enables operation from the ground
  • The remote unit contains all drive-related functions including speed adjustment, steering, hopper control and emergency switch.
Sliding steps
The operator platform is easy to access. The back rest and the extendible side steps improve working convenience and give the operator the security needed to focus on his job.

Engine, undercarriage key components

Engine
AFT 300-2 tracked paver utilises a 4-cylinder Deutz engine, which is available to meet either Stage IIIA or Stage V standards. The engines offer low emissions, outstanding fuel economy and reduced sound through insulation and the location of the cooling fan.

Stage IIIA / T3 Engine
  • Powerful and quiet
  • Improved fuel efficiency and cold-start performance
  • New cylinder block with deep crankcase for higher power and torque
Stage V / T4f Engine
  • Superior lifetime value with higher fuel efficiency
  • Reduced maintenance and longer service intervals
  • Improved common-rail technology for enhanced performance
EcoMode
EcoMode allows the engine to be set at the RPM needed for the current job. This leads to a reduced fuel consumption, which improves profitability. EcoMode also provides environmental benefits, including reduced sounds and emissions.

  • Adjusts engine speed to the jobsite’s requirements through a variably controlled system
  • Reduces fuel consumption and sound
  • Extends engine life
  • Eliminates risk of overheating, even in very hot conditions, through the cooler
Undercarriage
The Ammann AFT 300-2 Asphalt Paver is compact, but delivers plenty of traction, too – essential when paving on uneven surfaces. The compact paver features superior traction for its size class and offers great manoeuvrability, too.

  • Wide tracks (200 mm) and powerful hydraulic motors provide stability and fast transport and working speeds
  • Grease tensioning is conducted from the outside of the track frames
  • Track arrangement and improved centre of gravity provides smooth ride
  • Improved hydraulics transmit engine power to the ground, improving pull and traction

SCREEDS

Highest paving quality

  • Vibration available in basic screed and mechanical extensions
  • Robust and wear-resistant components
  • Wide bottom plates of 205 mm for smooth paving
  • Tamper / vibration screed available
  • Tamper and vibration system pre-compacts for best paving results
Precision

  • Slim end gates enable paving close to walls and curbs
  • Tamper and vibration speeds easily adjustable
  • Positive and negative crown profiling is mechanically adjustable from - 2.5 % up to + 4.5 %
  • Left and right screed sides equipped with remote control
  • All screed functions such as opening, closing, leveling and auger flow can be adjusted via the remote controls
Temperature control

  • Electric or gas heating screeds are available
  • Screed temperature can be set from the main dashboard
  • Temperature control unit conserves energy and ensures that screed is always at the desired temperature
  • All screed segments, including the hydraulic extensions, are “temperature controlled”

AFT 300-2 TRACKED ASPHALT PAVER – COMPACT CLASS
WEIGHT & DIMENSIONS
WEIGHT (INCLUDING STANDARD SCREED) 7000 kg
A = MACHINE LENGTH 4760 mm
B = TRANSPORT LENGTH 4140 mm
C = TRACK LENGTH 1390 mm
D = HOPPER LENGTH 1380 mm
E = MACHINE HEIGHT 2020 mm
F = TRANSPORT HEIGHT 2020 mm
G = HEIGHT 2020 mm
H = MATERIAL LOADING HEIGHT 570 mm
I = MACHINE, OPEN HOPPERS WIDTH 3915 mm
J = TRANSPORT WIDTH 1432 mm
K = TRACK GAUGE WIDTH 938 mm
L = MAX. APPROACH ANGLE 14° (front) / 13° (rear)
CAPACITY & PERFORMANCE
PLACEMENT THICKNESS (MAX.)  200 mm
THEORETICAL PAVING CAPACITY 300 t/h
PAVING SPEED (MAX.) 27 m/min
TRANSPORT SPEED (MAX.) 3.3 km/h
CRAWLER
CRAWLER LENGTH (AXLE TRACK) 1390 mm
CRAWLER WIDTH (PADS) 200 mm
FINAL DRIVE Direct drive over transmission
MATERIAL FEEDING SYSTEM
HOPPER CAPACITY 5.5 t
HOPPER DUMPING HEIGHT CENTER (W. HOPPER FLAP) 570 mm
HOPPER WIDTH, INTERNAL 2675 mm
CONVEYOR TYPE Independent conveyor drive with central cover
CONVEYOR WIDTH 620 mm
CONVEYOR CONTROL Automatic with limit switches
AUGER DIAMETER 320 mm
AUGER CONTROL Automatic with ultrasonic sensors
AUGER HEIGHT ADJUSTMENT 150 mm (mechanical)
ENGINE
ENGINE MODEL Deutz TD2.9 L4
RATED POWER @ 2200 RPM
   EU Stage V / U.S. EPA Tier  4f 55.4 kW
   EU Stage IIIA / U.S. EPA Tier  3 54 kW
ELECTRICAL SYSTEM 24 V
FUEL TANK CAPACITY 85 l
OPERATOR STATION
OPERATOR CONSOLE Conventional control
DASHBOARD Conventional control
PLATFORM With back rest for operator safety

 

SCREED OPTIONS
STV 2400 G STV 2400 E
BASIC WIDTH 1.20 m 1.20 m
HYDRAULIC EXTENDED WIDTH 2.40 m 2.40 m
MAX. WORKING WIDTH (WITH EXTENSIONS) 3.50 m 3.50 m
MIN. WORKING WIDTH (WITH REDUCTION SHOES) 0.50 m 0.50 m
CROWN RANGE -2.5% to +4.5% -2.5% to +4.5%
HEATING SYSTEM Gas (LPG) Electric
SCREED TYPE Tamper & vibration screed Tamper & vibration screed